Neon Sign Installation

How To Hang A Neon Sign Without Drilling

If you are wondering how to hang a neon sign in a dorm or how to hang a neon sign in a window, one of the easiest and fastest ways to hang a neon sign without drilling is using our 3M stripes or Acrylic Base. With this option, you don't need to have a drill or make holes on the wall. Just follow our simple steps:

Step 1: Determine the wall area you will hang the sign.
Step 2: Remove your neon sign from the box and turn it over.
Step 3: Stick 3M stripes to the back of your sign.
Step 4: Firmly press against the wall.
Step 5: Plug the sign in and chill.

Step 1: Remove your neon sign from the box.
Step 2: Apply the bases to the neon sign.
Step 3: Put the neon sign with bases on the table & Plug the neon sign in and chill.

How To Hang A Neon Sign With Drilling

For a more permanent hanging way, you can use the other two options we recommend (Screws & Chains-Size Under 30'', Nails & Wire Ropes-Size Above 30''):

Option 1: Using Mounting Screws/Nails (Drill Required!)

Step 1: Make pilot holes on the intended wall with a drill.
Step 2: Add the wall anchors into the holes with a hammer.
Step 3: Remove the base from the screws.
Step 4: Pass the screwdriver through the base.
Step 5: Screw bar through the glass, then tighten with the base.
Step 6: Finish installation. Plug the sign in and chill.

Option 2: Using Hanging Chain/Wire Rope

Step 1: Attach the hook or clip to the hanging hole. Ensure the hook or clip securely attaches to the hanging hole, providing stable support for the neon sign.
Step 2: Plug the sign in and chill.